The only species already durable before thermowood
Thermo Oak
Quercus robur — thermally modified at 212°C
European oak enters our kiln at EN 350 durability class 2 and leaves at class 1 — the very top of the scale. The only thermowood species in our range that starts as a durable heartwood and gets pushed into the premium band.
EN 350 durability shift
Raw oak
After thermowood-D
Class 1 — very durable, the highest band in EN 350:2016. Oak is the only species in our thermo range that reaches the top band.
Botanical
Quercus robur
Density
600–650 kg/m³
Hardness
Brinell ~3.4 N/mm²
Service life
25–30 yr Nordic
Chemicals
None — heat & steam
The heritage hardwood with a durability upgrade.
Quercus robur is European oak — the structural heartwood behind British Admiralty ships, Gothic cathedrals, wine barrels and parliamentary chambers for over a thousand years. Dense, ring-porous, slow to grow, and visually distinctive for its ray fleck when quartersawn.
What makes thermo oak unusual is where it starts on the durability scale. Raw oak heartwood already sits at EN 350 class 2 (durable) — the only commonly thermomodified species that is not non-durable to begin with. After our ThermoWood-D cycle at 212°C under steam, it pushes to class 1 (very durable), the highest band in the standard. Short Nordic cycle, premium endpoint.
Tannin content
High
Oak extractives are more acidic than ash or pine. A4 stainless fastenings required in all conditions, not just coastal.
Grain figure
Ray fleck
Distinctive medullary rays visible on quartersawn boards — the only thermowood species with this historical grain character.
Thermo Oak — raw vs modified.
Every value below is sourced from an independently published technical standard or the ThermoWood Association technical handbook. Nothing is estimated or marketing-derived.
Values double-verifiedPrimary sources: International ThermoWood® Association technical handbook (Finnish Thermowood Association); USDA Forest Products Laboratory, FPL-GTR-190 Chapter 19; EN 350:2016; EN 335:2013; EN 13501-1:2018; EN 1534:2020 (Brinell hardness); CEN/TS 15679:2007; ISO 21887. Independent test reports available per project on request.
Five applications.
Full process explanation on the Thermowood range page. Install specifications issued per project — request technical PDF.
See the board before you specify it.
Order free samples, download the technical datasheet, or send us the BOQ. We come back with profile, lead time and pricing. Shipped pan-India from Kaithal.