Wood Ceilings / Thermo PineThermo Pine Ceilings

Thermo Pine as a ceiling material

Light, stable boards in an even honey-brown for interior ceilings and sheltered soffits. For complete material data see the Thermo Pine master page.

Why it works overhead

Pine, promoted

Thermal modification removes pine's resin and locks moisture content low, which is the single most important thing for a ceiling material. Boards fit tight at install and do not cup under a long sightline. The even honey-brown colour runs through the full thickness, so cuts, mitres and shadow-gap reveals finish the same tone.

Thermo Pine ceilings suit kitchens, bathrooms, verandas and interior living areas where ordinary pine would stain, resin-bleed or move with humidity. For heavier commercial soffit exposure, consider Thermo Ash or Thermo Frake instead.

Installation

Fixed overhead, properly

BattensTreated battens at 400–600mm centres, perpendicular to board length. Shim to a flat plane first.
FixingsStainless A2 secret-fix clips for tongue-and-groove profiles; face-fix with A2 screws plugged with matching Thermo Pine plugs where required.
Expansion3–5mm perimeter gap at every wall and bulkhead junction.
Humidity roomsIn bathrooms and kitchens, ensure adequate extract ventilation; the modified board is dimensionally stable but still breathes with the room.
FinishClear hardwax oil for interiors; UV-pigmented exterior oil for sheltered soffits.

Full Thermo Pine specifications live on the master page

Density, EN 350 durability class, modification process, dimensional ranges, finish options and downloads — all on the Thermo Pine master. This page covers its use overhead.

Explore Pine across categories

Also available as Pine

Wall PanellingThermopine Wood Panelling →DeckingThermopine decking →ThermowoodThermopine →CeilingPine Wood Ceiling →ThermowoodThermo Radiata Pine →Wall PanellingPine Wood Panellings →

Product Enquiry

Share your details and our team will get back with samples, sizes & pricing.