The Rough Cut Collection
Vrikshat Rough Cut Veneer

The saw marks,
left on.

Veneer sawn, not sanded — so the texture of the cut stays on the face. It is a finish, not a wood type, so you can have it on any species we carry.

All
Species Supported
0.5mm
Face Thickness
8–12ft
Length Range
4ft
Width
What it is

Sawn, not
sanded.

A finish, not a species · applied across wood veneers

A smooth veneer is knife-cut and sanded flat. A rough-cut one is sawn and left alone, so the texture of the saw stays on the face.

You can see it and feel it — light catches the ridges and throws small shadows across the surface. The texture is cut in during slicing, not embossed or printed on afterwards, so it is as real as the grain under it.

01 Natural Grain Full grain and texture of the real wood, kept.
02 Raw & Rustic A surface you can feel — ridged, not flat.
03 Consistent Quality Face thickness held to spec on every sheet.
Smooth vs rough

One wood.
Two surfaces.

The same species, cut two ways. One knife-cut and sanded to a clean flat face. The other sawn and left, so the marks from the blade stay on the surface.

Smooth cut

Smooth / sanded

Knife-cut, sanded to a flat plane. The grain reads clean, with no texture to the touch. The usual choice for cabinetry and fine joinery.

Rough cut

Rough / minimally processed

Sawn and left. The grain still reads, but now the surface has texture and shadow you can feel — the mark of the saw, not polished out.

The process

Three steps, log
to finished face.

01

Carefully Sawn

The log is sawn into sheets and left, so the texture of the cut stays on the face.

→
02

Dried & Flattened

The sheets are dried and flattened so they stay put once they are up on site.

→
03

Quality Checked

Every sheet is checked for texture, grain and thickness before it ships.

Available on

A finish, not a species.
It works on every species.

17
Natural species
01WalnutDeep chocolate
02CherryPink-red
03White OakPale honey
04White AshLight cream
05Red OakWarm reddish
06BeechPink-cream
07SapeleRed-brown ribbon
08Burma TeakWarm amber
09PineNordic blonde
10WengeNear-black
11MahoganyDeep red-brown
12MaplePale blonde
13TulipPale green-cream
14EucalyptusHoney rose
15SucupiraRich red-brown
16SantosDeep rose-brown
17PadaukVivid orange-red

Rough cut is a surface treatment, not a wood type. All seventeen species from the natural range come with the rough-cut finish — the species sets the colour and grain, the cut adds the texture.

Technical data

Standard specifications.

All figures from the Vrikshat Rough Cut Veneer specification. Customisation available on project enquiry.

Face thickness
0.5 mmRough cut decorative face
Length
8 ft – 12 ftCustomised lengths on request
Width
4 ftCustomised widths on request
Wood base
Oak, Walnut, Teak, Ash, Maple, Cherry, Mahogany & more
Finish options
Raw / UnfinishedLacquer, PU or oil over the texture
Application
Interior useJoinery, cladding, cabinetry, feature walls
Works on
Every available speciesSurface treatment, not species-restricted
Packaging
Protective wrapPan-India from Kaithal, Haryana

The texture varies sheet to sheet — that comes with a sawn finish and is not a fault.

Order samples

Feel the texture in your hand.

Three rough-cut samples, species of your choice, in the post within 48 hours. Ask for a smooth sheet of the same wood alongside and compare the two faces side by side.

Product Enquiry

Share your details and our team will get back with samples, sizes & pricing.