Decking Boards / Thermo AshThermo Ash · Decking

Hardwood decking, built to stay flat.

Thermally modified ash as a decking board. Through-colour chocolate brown, EN 350 Class 1 durability, no chemical preservatives, and far less seasonal movement than natural ash or softwood decking.

Why Thermo Ash underfoot
EN 350 Class 1Without copper or chrome
Through-colourBrown runs full thickness
Low movementFlat boards, even gaps
Where it belongs

A deck that reads as architecture, not timber maintenance

Decking is the hardest condition we specify timber for: ground-adjacent, exposed to sun, rain, and foot traffic every day. Thermal modification at 215°C permanently drives moisture out of the cell wall and makes the sugars that feed decay fungi unavailable. The result is a hardwood deck that reaches EN 350 Class 1 durability without copper or chrome treatments. Dimensional stability is the other half of the story: natural ash cups and twists badly outdoors; Thermo Ash moves far less, so boards stay flat and gaps stay even through the seasons.

Pool and spa surroundsSplash exposure, chlorine, bare feet. Low thermal gain compared with composite, and stable enough that boards stay flat around the coping.
Rooftop terracesFull sun and wind exposure, limited load capacity, and a need for lightweight boards that will not telegraph into waterproofing below.
Verandahs and villa decksThe classic residential application. Dark through-colour reads as a deliberate counterpoint to lighter stone, render or lawn edging.
Commercial boardwalksHotel pool decks, resort walkways, hospitality terraces. The hardness holds up to heeled traffic and dropped furniture.
Installation

Specified like the structural element it is

JoistsTreated hardwood or steel sub-structure at 400mm centres (300mm for diagonal lays or heavier boards). Keep boards 150mm clear of soil and standing water.
FixingsStainless steel A2 or A4 only; galvanised fasteners stain thermally modified timber. Hidden clip systems are the cleaner finish; pre-drill before face-fixing to prevent end splitting.
Spacing5–7mm gaps between boards for drainage and airflow. Thermo Ash moves less than natural timber but still needs room to breathe.
Finish & weatheringLeft raw, boards silver to a soft platinum grey within 12 months. To hold the chocolate tone, apply a UV-pigmented decking oil at install and once a year thereafter.
VentilationOpen underside, at least 50mm of airflow between board and substrate. A sealed deck traps moisture even with modified timber.

Properties, dimensions and downloads live on the Thermo Ash master page

This page covers Thermo Ash as a decking material. For the complete specification — density, modulus of elasticity, Brinell hardness, EN 350 durability class, EN 13501-1 fire class, dimensional ranges, finish options and project downloads — go to the master.

Explore Ash across categories

Also available as Ash

Wall PanellingThermoash Wood Panelling →CeilingThermo ash Ceilings →VeneerWhite Ash →CeilingWhite Ash Wood Ceiling →Wall PanellingWhite Ash Wood Panelling →Natural VeneerAmerican Ash Veneer →ThermowoodThermo Ash →

Product Enquiry

Share your details and our team will get back with samples, sizes & pricing.