Real wood on top. Engineered underneath.
A genuine hardwood face bonded to a cross-ply core. The look and feel of solid wood, with the stability Indian conditions demand.
Why engineered instead of solid?
Solid wood flooring is one piece of timber, 18–22 mm thick. That is its strength and its weakness. In Indian humidity, solid planks swell in monsoon and shrink in winter. Wide boards cup. Underfloor heating is risky.
Engineered wood solves this. A real hardwood face (3–6 mm — the part you see and walk on) is bonded to a cross-ply plywood or HDF core. The layers pull in opposite directions, so the board stays flat.
The face is real wood — you can sand and refinish it 2–4 times. It is not laminate. Every plank carries the actual grain of the species you chose.
Solid wood vs engineered — honest comparison.
Neither is better. They suit different situations.
Lifespan: USDA FPL-GTR-190 Ch. 16. Engineered = real-wood face on plywood/HDF core, not laminate (printed film).
You choose the wood. We build the board.
The face layer is real hardwood or thermowood. Pick the species and we laminate it onto the engineered core. Any species from our range.
Hardwood face species
Janka hardness of the face wood. Source: USDA FPL.
Thermowood face options
Modified at 212°C — deeper colour, lower movement. Same core.
Sources: USDA FPL-GTR-190 Ch. 5; The Wood Database; EN 1534:2020. Availability per batch.
Start with a sample.
Pick a species and plank width. Free sample so you see the face grain in your own light. One working day response.