The Open Grains Collection
Vrikshat Open Grains Veneer

Grain that
speaks depth.

Some woods — oak, ash, elm — have large, open pores running along the grain. Leave those pores open and the surface has real texture you can run a hand over, not just a pattern to look at.

All
Species Supported
0.5mm
Face Thickness
8–12ft
Length Range
2
Finish Options
What it is

Not a species.
A finish.

Applied across the Vrikshat veneer range

Open grains veneer showcases the naturally large pores and prominent grain structure found in species like oak, ash and elm.

Open-grain species — oak, ash, elm and others — have wide pores that sit along the grain lines. Tight-grained woods like maple do not. On an open-grain sheet you can leave those pores open, so the face has texture you can feel, or fill and sand them for a flat polish. Same sheet, your call on the finish.

The two faces A finish, not a species · applied across wood veneers
The anatomy of grain

Open pores. Visible depth.

All wood has grain. Not all of it has pores you can see or feel. Open-grain species have wider vessels running through them, and those are what give the finished sheet its texture.

Fig. 01 Open grain

Open pores.
You can feel them.

The wide vessels stay open on the finished face. Light catches each pore line, so the surface has depth you notice up close and feel when you touch it.

Reads strongest on
Oak·Ash·Elm·Walnut·Teak
Fig. 02 Closed grain

Tight pores.
Smooth face.

The vessels are fine and sit flush. You see the grain as colour and pattern, but the face is smooth — it polishes up without any filling.

Natural examples
Maple·Cherry·Beech·Birch·Poplar
01 Visible grain pores Keeps the natural pores of the wood instead of sanding them flat.
02 Tactile touch You can feel it, not just see it — the texture is the pore itself, not a coating on top.
03 Consistent finish The pores open evenly across the whole sheet — no patchy areas, no feathering.
Finish options

Two faces, same sheet.

Leave the pores open for texture, or fill and sand them for a flat polish. Both come off the same sheet — which one you want depends on the job.

A

Option A

Raw & unfilled

Pores left open as cut — most texture, most character. Lacquer or oil goes straight over the open pores.

RusticModern panelingArchitect-specified
B

Option B

Filled & sanded

Pores filled, face sanded flat. The grain still shows, but the surface is smooth to the touch — the choice for fine cabinetry.

RefinedCabinetrySmooth polish
Open grains applied on

All seventeen.
Without exception.

17
Natural species supported
01WalnutDeep chocolate
02CherryPink-red
03White OakPale honey
04White AshLight cream
05Red OakWarm reddish
06BeechPink-cream
07SapeleRed-brown ribbon
08Burma TeakWarm amber
09PineNordic blonde
10WengeNear-black
11MahoganyDeep red-brown
12MaplePale blonde
13TulipPale green-cream
14EucalyptusHoney rose
15SucupiraRich red-brown
16SantosDeep rose-brown
17PadaukVivid orange-red
Available in all species Open grains is a finish done during slicing — every species in the natural range can take it.
See full natural range →
The process

Three steps
to a finished face.

Every step protects the pores that give the sheet its texture.

01

Select veneer

We pick the veneer with you — the species sets the colour and grain, and how open you want the pores sets the rest.

02

Open grain process

The pores are opened evenly across the whole face, without touching the colour or figure of the wood.

03

Ready finish

The sheet ships site-ready. Finish it raw to keep the texture, or fill and sand on site for a smooth cabinetry face.

Technical data

Face thickness, spec-ready.

0.5mm
Decorative face
Length
8 ft – 12 ftCustomised lengths on request
Width
4 ftCustomised widths on request
Finish options
Raw / Unfinished · Filled & Sanded
Application
Interior useCabinetry, modern paneling, architectural features, furniture
Works on
Every available speciesTreatment, not species-restricted
Best suited
Oak, Ash, Elm, Walnut, Teak, Sapele, Wenge
Substrate
MDF / PlywoodGrades to project requirement
Packaging
Protective wrapPan-India from Kaithal, Haryana

Pore density changes from species to species — that is how the wood grew, not a fault.

Order samples

See the pore depth for yourself.

Three open-grain samples, species of your choice, in the post within 48 hours. Ask for them raw, filled, or both — then decide the finish against your own light.

Product Enquiry

Share your details and our team will get back with samples, sizes & pricing.